Selecting The Operating Mode - DeDietrich AFC 30 User Manual

5. Operating the appliance
MODE Menu
Parameter Adjustment range Description
AUTOMATIQUE
7/7, xx:xx
DAY
7/7, xx:xx
NIGHT
7/7, 1 to 364
HOLIDAYS
SUMMER
MANUEL
(2) YES / NO
FORCE AUTO
(1) The start and end days and the number of days are calculated in relation to each other.
(2) The parameter is only displayed if a room sensor is connected.
21
5.3.2.
To select an operating mode, proceed as follows:
1. Press the MODE key.
2. To select the desired parameter, turn the rotary button.
3. To modify the parameter, press the rotary button.
To go back to the previous display, press the key j .
4. To modify the parameter, turn the rotary button.
5. To confirm, press the rotary button.
MODE
C002267-A
The comfort ranges are determined by the timer programme.
Comfort mode is forced until the time indicated or all the time (7/7). Present time + 1
Reduced mode is forced until the time indicated or all the time
(7/7).
The antifreeze mode is active on all boiler circuits.
Number of days' holiday: xx
heating OFF: xx:xx
(1)
Restarting: xx:xx
The heating is off.
Domestic hot water continues to be produced.
The generator operates according to the set point setting. All of
the pumps operate. Option of setting the set point by simply
turning the rotary button.
An operating mode override is activated on the remote control
(option).
To force all circuits to run on AUTOMATIQUE mode, select
YES.

Selecting the operating mode

To cancel, press key h .
(1)
(1)
AFC 18 - AFC 24 - AFC 30
Factory setting
hour
Present time + 1
hour
Present date + 1
day
15/07/2015 - 300026440-05