Operating The Touch Pad - Panasonic CF-18 Series Reference Manual

Touch Pad
Changing the mode of the touch pad

Operating the Touch Pad

When you are not sure whether an application is compatible with the Microsoft
function or not, try using both modes. Depending on the application, there are cases
where scrolling may not be possible with either mode.
A
Display the setting menu.
Select on the taskbar or select [Mouse] in [start] - [Control Panel] - [Printers
and Other Hardware] - [Mouse], and then select [TouchPad].
B
Change the settings.
To set the Microsoft
Add the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration].
To set the original mode
Remove the check mark for [IntelliMouse Wheel mode] of [Scroll
Configuration] and then add the check mark for [Vertical] and/or [Horizontal].
C Select [OK].
Function
Moving the Cursor
Tapping/Clicking
®
IntelliMouse™ Wheel mode
Move the tip of your finger lightly over the work
surface.
tapping or
To right-click: click with the right button
16
Operation
clicking
®
wheel