Panasonic CF-18 Series Reference Manual page 79

Panasonic personal computer user manual
Hide thumbs Also See for CF-18 Series:
Table of Contents

Advertisement

LAN
The Wake up from LAN function will not operate under the following conditions:
• When the computer has been shut down.
• When the power switch is slid over for four seconds or longer to turn off the power
(e.g., when the computer hangs).
• When the AC adaptor and battery pack are removed from the computer or
reattached to the computer.
• When the LAN cable is disconnected and reconnected.
After operations are resumed from standby mode, the screen remains dark. The
former screen display will be restored when the keyboard, touch pad, touchscreen, or
tablet button is used.
The Wake up from LAN function will operate regardless of the [Boot up from LAN]
setting of the Setup Utility.
The computer may start up if accessed by another computer on the network.
The following procedure can be used to prevent startup due to unintentional access
by a computer.
A
Select [start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager] - [Network adapters].
B
Select the internal network adaptor, and then select [Power Management].
C
Add the check mark for [Allow this device to bring the computer out of standby]
and [Only allow management stations to bring the computer out of standby],
then select [OK].
79

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents