Panasonic CF-18 Series Reference Manual page 31

Panasonic Hand Writing
top-left part of the work surface of the touch pad will be displayed in the top-left part
of the Panasonic Hand Writing window.
A
Select or select [Touch Pad mode] in [Option].
B
Draw a character or figure using the touch pad.
Determine the position to begin drawing while pressing down on the right button
of the touch pad. After determining this position, release your finger from the
button and draw. (Drawing is not possible while the right button of the touch pad
is being pressed.)
C
Press the left button of the touch pad to end the Touch Pad mode.
When not using the Touch Pad mode
*1
A
Drag across the Panasonic Hand Writing window to draw a character or
figure.
*1
Touch pad: page 15
Touchscreen: page 23
NOTE
Do not operate any of the followings when using the Panasonic Hand Writing in the
Touch Pad mode. The Touch Pad mode will be cancelled.
• Switch to another application.
• Resume operation from the standby or hibernation mode.
• Display the settings screen for [Panasonic Hand Writing].
• Select a menu after pressing Alt.
• Touch the touchscreen.
In the following cases, the Touch Pad mode does not work properly.
• When the computer is in the Extended Desktop.
• When the display is rotated 90 or 270 degrees.
In the Touch Pad mode, an external mouse or trackball connected to the external
keyboard/mouse port of the port replicator will not operate.
When a screen saver has been set, it may start up during input in the Touch Pad
mode.
3
Select [Save As] or [Save] from [File].
CAUTION
When using the touchscreen, use the stylus included with the computer. Do not use
any of the following objects, as they may damage the work surface.
31