Panasonic CF-18 Series Reference Manual page 47

Security Measures
Setting the Hard Disk Lock (enabling, disabling)
The hard disk lock function only works with the internal hard disk. This function does
not work with the second hard disk or the external hard disk.
1
Run the Setup Utility. (
2
Using either
3
Using either
4
Select [Enable] or [Disable].
To enable the Hard Disk Lock
Select [Enable] and press Enter. At [Caution], press Enter.
To disable the Hard Disk Lock
Select [Disable] and press Enter.
5
F10
Press and select [Yes], then press
CAUTION
To change your hard disk drive
• Contact Panasonic Technical Support.
• Before changing the hard disk, be sure to set the [Hard Disk Lock] to [Disable].
page 88)
or , select [Security].
or , select [Hard Disk Lock] and press
47
Enter
Enter
.
.