Shutting Down; Standby/Hibernation Function - Panasonic CF-18 Series Reference Manual

Dealing with Problems (Advanced)
Setup Utility
[Advanced] and [Boot] menu can not
be registered
Some items in [Security] menu can not
be registered
F9 does not work

Shutting Down

Windows cannot be shut down or
restarted

Standby/Hibernation Function

Unable to enter standby or hibernation
mode
Unable to automatically enter standby
or hibernation mode
The computer does not resume
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
If a USB device is connected, try removing it.
It may take one or two minutes to shutdown.
If a USB device is connected to the computer (note: only for some USB
devices), remove the USB device temporarily. If the problem persists, restart
the computer.
It may take one or two minutes to enter the standby or hibernation mode.
The computer may not enter standby mode properly and seems to be frozen in
the case that the computer is communicating via the modem. If this happens,
slide the power switch for four seconds or more to forcibly turn your computer
off.
If a peripheral is connected to the computer, disconnect the device.
Did you slide the power switch and hold it for four seconds or more? If you slide
the power switch and hold it for four seconds or more, the power will be turned
off forcibly. In this case, all unsaved data will be lost.
Did you disconnect the AC adaptor or the battery pack while the computer was
in standby mode? If the computer's power supply is disconnected while the
computer is in standby mode, the unsaved data will be lost.
111