Specifications - Yamaha r-n602 Owner's Manual

Network
• Input jack: NETWORK x 1 (100Base-TX/10Base-T)
• PC client function
• Compatible with DLNA ver. 1.5
• AirPlay supported
• Internet radio
• Streaming service
• Wi-Fi function
Capable of WPS
Capable of sharing with iOS devices by wireless connection and
USB connection
Capable of direct connection with mobile device
Available security method: WEP, WPA2-PSK (AES), Mixed Mode
Radio frequency band: 2.4 GHz
Wireless network standard: IEEE 802.11 b/g/n
Bluetooth
• Source function
This unit to sink device (ex. Bluetooth headphone)
Supported codec ..........................................................................SBC
• Sink function
Source device to this unit (ex. smartphone/tablet)
Supported codec ............................................................... SBC, AAC
• Capable of play/stop operation from sink device
• Bluetooth version .........................................................Ver. 2.1+EDR
• Supported profile........................................................A2DP, AVRCP
• Wireless output....................................................... Bluetooth Class 2
• Maximum communication distance
........................................................10 m (33 ft) without interference
USB
• Input jack: USB x 1 (USB2.0)
• Capable of iPod, mass storage class USB memory
• Current supply capacity: 1.0 A
Audio
• Minimum RMS output power
(20 Hz to 20 kHz, 0.04% THD, 8 ) ....................... 80 W + 80 W
• Dynamic power per channel (IHF) (8/6/4/2 )
............................................................................ 105/125/150/178 W
• Maximum power per channel (1 kHz, 0.7% THD, 4 Ω)
[U.K. and Europe models] ................................................... 105 W
• IEC power (1 kHz, 0.04% THD, 8 Ω)
[U.K. and Europe models] ..................................................... 84 W
• Power band width (main L/R)
(0.06%THD 40.0 W, 8Ω) ......................................10 Hz to 50 kHz
• Damping factor (SPEAKERS A)
1 kHz, 8  ..................................................................150 or more
• Maximum effective output power (JEITA)
(1 kHz, 10% THD, 8 )
[Asia and General models]....................................................115 W
• Input sensitivity/input impedance
PHONO (MM) ......................................................... 3.5 mV/47 kΩ
CD, etc. .................................................................. 200 mV/47 k
• Maximum input signal
PHONO (MM) (1 kHz, 0.003% THD) ..................60 mV or more
CD, etc. (1 kHz, 0.5% THD).....................................2.2 V or more
• Output level/output impedance
CD, etc. (input 1 kHz, 200 mV)
OUT .................................................................... 200 mV/1.1 k
SUBWOOFER PRE OUT .................................... 4.0 V / 1.2 kΩ
(Cut off frequency) .............................................................90 Hz
PHONES (8  load)............................................. 410 mV/470 
• Frequency response
CD, etc. (20 Hz to 20 kHz) ........................................... 0 ± 0.5 dB
CD, etc. (10 Hz to 100 kHz, PURE DIRECT on) ......... 0 ± 1.0 dB
• RIAA equalization deviation
60
En

Specifications

PHONO (MM)................................................................... ± 0.5 dB
• Total harmonic distortion
PHONO (MM) to OUT
(20 Hz to 20 kHz, 3 V) . ....................................... 0.025% or less
CD, etc. to SPEAKERS
(20 Hz to 20 kHz, 40.0 W, 8 ) ........................... 0.015% or less
• Signal to noise ratio (IHF-A Network)
PHONO (MM) (input shorted, 5 mV) ......................87 dB or more
CD, etc. (input shorted, 200 mV) ...........................100 dB or more
• Residual noise (IHF-A network) .............................................30 µV
• Channel separation
CD, etc. (5.1 k input shorted, 1/10 kHz) ......... 65/50 dB or more
• Tone control characteristics
BASS
Boost/cut (20 Hz) ........................................................... ± 10 dB
Turnover frequency .......................................................... 350 Hz
TREBLE
Boost/cut (20 kHz) ......................................................... ± 10 dB
Turnover frequency ......................................................... 3.5 kHz
• Continuous loudness control
Attenuation 1 kHz.................................................................-30 dB
• Gain tracking error (+16.5 to -80 dB) ..........................0.5 dB or less
• Digital input (OPTICAL/COAXIAL)
Support audio sample rate .......... 32/44.1/48/88.2/96/176.4/192 kHz
FM
• Tuning range
[U.S.A. and Canada models] ........................... 87.5 to 107.9 MHz
[Asia and General models] ........ 87.5/87.50 to 108.0/108.00 MHz
[U.K., Europe, Korea, Australia models] .... 87.50 to 108.00 MHz
• 50 dB quieting sensitivity (IHF, 1 kHz, 100% MOD.)
Mono .................................................................. 3.0 µV (20.8 dBf)
• Signal to noise ratio (IHF)
Mono/stereo ............................................................... 65 dB/64 dB
• Harmonic distortion (1 kHz)
Mono/stereo .................................................................. 0.5%/0.6%
• Antenna input .........................................................75 W unbalanced
AM
• Tuning range
[U.S.A. and Canada models] ............................... 530 to 1710 kHz
[Asia and General models] .................. 530/531 to 1710/1611 kHz
[U.K, Europe, Korea, Australia models] .............. 531 to 1611 kHz
General
• Power supply
[U.S.A. and Canada models] .............................. AC 120 V, 60 Hz
[General model] ....................... AC 110-120/220-240 V, 50/60 Hz
[Korea model]...................................................... AC 220 V, 60 Hz
[Australia model] ................................................ AC 240 V, 50 Hz
[U.K. and Europe models] .................................. AC 230 V, 50 Hz
[Asia model] .......................................... AC 220-240 V, 50/60 Hz
• Power consumption ................................................................. 190 W
• Off mode................................................................................... 0.1 W
• Standby power consumption (reference data) .......................... 0.1 W
• Network Standby on
Wired ..................................................................................... 1.7 W
Wireless (Wi-Fi/Wireless Direct/Bluetooth).... 1.8 W/1.9 W/1.6 W
• Maximum power consumption (1 kHz, 8 Ω, 10% THD)
[U.K., Australia, Asia and General models]......................... 380 W
• Dimensions (W  H  D) ................................ 435  151  392 mm
• Weight...................................................................... 9.8 kg (21.6 lbs)
* Specifications are subject to change without notice.
(17-1/8"  6"  15-7/16")