Playing Back Music Stored On Media Servers (Pcs/Nas); Setting The Media Sharing Of Music Files - Yamaha r-n602 Owner's Manual

Playing back music stored on media servers (PCs/NAS)

You can play back music files stored on your PC or DLNA-compatible NAS on the unit.
Notes
• To use this function, the unit and your PC/NAS must be connected to the same router (p. 14). You can check whether the network
parameters (such as the IP address) are properly assigned to the unit in "Information" (p.46) in the "Setup" menu.
• The unit supports playback of WAV (PCM format only), AIFF, MP3, WMA, MPEG-4 AAC, FLAC, ALAC and DSD files.
• The unit is compatible with sampling rates of up to 192 kHz for WAV, AIFF and FLAC files, 96 kHz for ALAC files, and 48 kHz for
other files.
• The unit is compatible with 2.8 MHz/5.6 MHz (1 bit) DSD files.
• Digital Rights Management (DRM) contents cannot be played back.
• To play back music files, the server software installed on the computer (server) must support the music files that you want to play
back.
y
You can connect up to 16 media servers to this unit.
Setting the media sharing of music
files
To play back music files in your computer with this unit,
you need to make the media sharing setting between the
unit and computer (Windows Media Player 11 or later). In
here, setting with Windows Media Player in Windows 7 is
taken as an example.
■ When using Windows Media Player 12
1
Start Windows Media Player 12 on your PC.
2
Select "Stream", then "Turn on media
streaming."
The control panel window of your PC appears.
(Example of English version)
NAS
PC
This unit
3
Click "Turn on media streaming."
31
En