Gas Hydraulic Pump Belt; Parking Brake Cable - Cushman Turf Truckster 84069 Parts & Maintenance Manual

4.8

GAS HYDRAULIC PUMP BELT _______________________________________________

Inspect new belt after first 24-48 hours of operation.
Belt is dynamically adjusted with a spring loaded
tensioner to 12 ft-lbs. No adjustment is required.
To remove belt rotate tensioner towards radiator to
release tension and remove belt from pulleys.
4.9

PARKING BRAKE CABLE ___________________________________________________

1. Remove the engine cover. Put chocks in front of and
behind at least two wheels at opposite corners of
vehicle.
2. Engage parking brake. If handle is at an angle
greater than 45° to the panel, adjustment is
required.
3. Disengage parking brake.
4. Tighten adjustment nut (G) a couple of turns.
5. Engage parking brake. Repeat steps 3 and 4 until
handle is at an approximate 45° angle when parking
brake is engaged.
ADJUSTMENTS
G
4
Figure 4I
Figure 4J
en-15