Differential Fluid; Diesel Engine Manual Transmission - Cushman Turf Truckster 84069 Parts & Maintenance Manual

MAINTENANCE 5

5.22 DIFFERENTIAL FLUID ______________________________________________________

The differential fluid should be checked every 100 hours
or 3 months. Fluid should be changed after the first 100
hours and every 600 hours (or yearly) thereafter.
Differential Fluid Capacity ...... 3 qts (2.84 l)
Level Check And
Fluid Type .............................. SAE EP 80-90 gear lube
Fill Plug
To check differential fluid level remove the filler plug from
the front of the differential. Fluid should be level with the
bottom of filler hole.
If fluid is low add gear lube until fluid begins to leak from
hole. Apply pipe thread sealant and install filler plug.
To change differential fluid remove drain plug from rear of
differential.
Allow fluid to drain into a suitable container. Dispose of
Figure 5N
used fluid properly according to federal, state, and local
regulations.
Apply pipe thread sealer to drain plug and install.
Fill differential with gear lube until fluid begins to leak
from hole. Apply pipe thread sealant and install filler plug.
Drain Plug
Figure 5O

5.23 DIESEL ENGINE MANUAL TRANSMISSION ____________________________________

The transmission fluid should be checked every 100
hours or 3 months. Fluid should be changed every 600
hours (or yearly).
Level Check And
Transmission Fluid Capacity .. 1.35 qts (1.28 l)
Filler Plug
Fluid Type .............................. SAE EP 80-90 gear lube
To check transmission fluid level remove the filler plug
Transmi ssi on
from the front of the transmission. Fluid should be level
Drain Plug
with the bottom of filler hole.
If fluid is low add gear lube until fluid begins to leak from
hole. Apply pipe thread sealant and install filler plug.
To change fluid remove drain plug from rear of
transmission.
Allow fluid to drain into a suitable container. Dispose of
Figure 5P
used fluid properly according to federal, state, and local
regulations.
Apply pipe thread sealer to drain plug and install.
Fill transmission with gear lube until fluid begins to leak
from hole. Apply pipe thread sealant and install filler plug.
en-29