Table of Contents
Advertisement
Choosing
the Location
Dimensions
& Clearances
Select a location as
close to the sink as
possible for easy
access to water and
drain lines.
• The dishwasher must be located within reach
of the drain hose. The maximum drain hose
length is 10 feet. Consideration for the
installation of a high drain loop or air gap
must be included when determining the
installation location. See "Prepare Drain
Plumbing", page 8 and "Install Drain Plumb-
ing", page 19.
• The rough opening should be 23-5/8" min.
to 24" max. wide, 24" deep and 34" to 35"
high.
If the dishwasher is installed in a corner, allow
2" min. clearance between dishwasher and
adjacent cabinet, wall or other appliances.
Installation Preparation
Stainless Steel Interior Dishwashers
This Wall Area
must be Free of
Pipes or wires
34" to 35"
Underside of
Countertop
to Floor
Plumbing and Electric Service
Must Enter Inside This Area
23-5/8" Min.
24" Max.
• Adjacent cabinets should be square and
plumb to ensure a good fit.
• The floor inside the opening must be level
and even with the kitchen floor.
• The dishwasher must be fully enclosed on
the top, sides and back.
• Filler strips are provided to cover gaps on the
sides of dishwasher.
23-3/8"
34" Min.
35" Max.
24"
Min.
1-3/4"
6"
22-5/8"
25-1/4"
From Inside
Front Frame
5
Advertisement
Table of Contents
