Table of Contents
Advertisement
9
• Carefully upright the dishwasher, so as not to
Step
• Tilt the dishwasher slightly and slip leg slides
• Check to be sure the dishwasher is level and
Level The
Dishwasher
• Tighten the bolts on each leveling leg against
10
Side filler strips are packed with the product.
If the cabinet cutout is wider than the dish-
Step
washer, install the filler strips on both sides of
the dishwasher to cover gaps.
Install
• Open the door fully.
• Remove the two screws on the inside front
Side Filler
• Remove the plastic covering the adhesive
Strips
• Carefully, align the screw holes on the filler
• Secure filler strips with original screws.
11
Locate the drain hose packed with the
dishwasher.
Step
• Fit the drain hose onto the drain hose
• Press together firmly and secure with a screw
Connect
Drain Hose
12
• Insert the drain hose into the cabinet wall.
• Slide the dishwasher into the opening a few
Step
• As you proceed, pull the drain hose through
Slide
• If a power cord has been installed, insert the
Dishwasher
Into Opening
• Check to be sure there is no interference
bend the leveling legs.
under the leveling legs.
at the proper cutout height.
the bottom of the dishwasher.
frame of the dishwasher.
strip on the back side of the filler strip.
strip with screw holes on the dishwasher.
Press firmly into place.
adapter on the back of the dishwasher.
type clamp supplied.
inches at a time.
the cabinet wall under the sink.
cord through a separate hole in the cabinet
wall and pull along with drain hose.
with waterline or house wiring.
Installation
Stainless Steel Interior Dishwashers
Level
Top
And
Sides
Leg Slides
Leg Slides
18
Advertisement
Table of Contents
