Controlling Other Components - Yamaha R-S500 Owner's Manual

Notes
• When using only one TV: Assign the TV's remote control code
to the TV A button. The TV control buttons always control your
TV, regardless of the selected input source.
• To use other buttons (*1, above) to control your TV: Assign the
TV's remote control code to the TV A button, and also to an
input selector button. The TV control buttons always control
your TV, regardless of the selected input source. You can use
the other buttons to operate the TV by first pressing the input
selector button to which the TV is assigned.
• To control more than one TV: Assign one TV to the TV A
button and the other TVs to other input selector buttons. You
can control the other TVs assigned by first pressing the input
selector button to which a TV is assigned. You can use the TV
control buttons to control the first TV whenever an input
selector button with no TV assigned to it is selected.

■ Controlling other components

To use this unit's remote control to control other
components (DVD player, VCR, etc.), determine the
remote control code that corresponds to the component
and assign that code to the desired input selector button on
the remote control. For details about assigning remote
control codes, see page 40.
To switch the input source and control the corresponding
component, press the input selector button on the remote
control, and then press the desired control button.
y
• The remote control code for other components can also be
assigned to [A].
By assigning the remote control code for a component to [A],
you can control the component using the remote control without
changing this unit's input source. For example, you can use this
function when you want to use the remote control to control a
component that is not connected to this unit.
• If you are unable to operate this unit after using the remote
control to operate an external component, press RECEIVER
and then try operating the remote control again.
[1]
[2]
[3]
[4]
[5]
[6]
The following table is an example of the component
features that may be controlled using this remote control.
Note that some features of the corresponding component
may not be supported, and that some buttons may not
correctly control the selected component.
Remote control
[1] SOURCE A
[2] TOP MENU
[3] B
C
D
E
ENTER
[4] RETURN
[5] DISC SKIP/REC
p
w
f
e /A/B
b /DIR A
a /DIR B
s
[6] 1-9, 0, +10
[7] MENU
[8] DISPLAY
[9] ENTER
REMOTE CONTROL FEATURES
Input selector
and [A] buttons
[7]
[8]
[9]
RECEIVER
Feature (example)
Power
Title
Up
Down
Left
Right
Enter
Return
Disc skip (player)
Rec (recorder)
Play
Search backward
Search forward
Pause (player, recorder)
Deck A/B (tape deck)
Skip backward (player, recorder)
Direction A (tape deck)
Skip forward (player, recorder)
Direction B (tape deck)
Stop
Numeric buttons
Menu
Display
Title/Index
39
En