Controls And Functions; Front Panel - Yamaha R-S500 Owner's Manual

CONTROLS AND FUNCTIONS

Front panel

y
indicates buttons and controls that can also be used to
control Zone 2. For more information about Zone 2, see pages 36
and 37.
1 MAIN ZONE A
Turns on this unit's Main Zone unit or sets the Main Zone
to standby mode (see page 16).
Note
In standby mode, this unit consumes a small amount of power to
receive infrared signals from the remote control.
2 MAIN ZONE indicator
Lights up as follows:
Brightly lit: Power is on
Dimly lit: Standby mode
Note
The MAIN ZONE indicator is brightly lit while an iPhone/iPod is
charging.
3 SPEAKERS A/B
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel each time the corresponding button is pressed (see
page 16).
4 DIMMER
Changes the brightness level of the front panel display.
Choose brightness from 3 levels by pressing this button
repeatedly.
4
En
CONTROLS AND FUNCTIONS
y
This setting is retained even if you turn off this unit.
5 FM MODE/INFO
Changes the FM radio wave reception mode (stereo or
monaural) when TUNER is selected as the input source
(see page 21).
Changes the playback information displayed about the
song playing on the iPhone/iPod when DOCK is selected
as the input source (see page 27).
Note
Playback information can only be displayed for an iPhone/iPod
that is connected using a Universal Dock for iPod.
6 MEMORY
Stores the current FM/AM station as a preset when
TUNER is selected as the input source (see page 23).
7 CLEAR
Clears the current FM/AM preset station when TUNER is
selected as the input source (see page 24).
8 Front panel display
Shows information about the operational status of this
unit.
9 PRESET j / i
Selects a preset FM/AM station when TUNER is selected
as the input source (see page 24).
(R-S700)