Download Print this page

Yamaha r-s202 Owner's Manual

Hide thumbs





  Related Manuals for Yamaha r-s202

  Summary of Contents for Yamaha r-s202

  • Page 1 Receiver OWNER’S MANUAL...
  • Page 2: Important Safety Instructions

    We Want You Listening For A Lifetime Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion –...
  • Page 3 “OFF” requirements. Modifications not expressly approved by and “ON”, please try to eliminate the problem by using Yamaha may void your authority, granted by the FCC, one of the following measures: to use the product.
  • Page 4 Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.
  • Page 5: Table Of Contents

    USEFUL FEATURES This unit allows you to: ◆ Enjoy clear audio sound wirelessly using Bluetooth ◆ Use the remote control of this unit to operate a Yamaha technology (see page 13). CD player (see page 7). ◆ Listen to FM and AM radio stations (see page 15).
  • Page 6: Controls And Functions

    CONTROLS AND FUNCTIONS Front panel BAND 5 MEMORY (power) Turns this unit on, or sets it to standby mode. Stores the current radio station as a preset when TUNER is selected as the input source (see page 16). 2 FM MODE 6 BAND Changes the FM radio wave reception mode (stereo or monaural) when TUNER is selected as the input...
  • Page 7 CONTROLS AND FUNCTIONS A PHONES jack For connecting headphones. Press SPEAKERS A/B so that the SP A/B indicators (see page 4) turn off before you connect your headphones to the PHONES jack. B SPEAKERS A/B Turns on or off the speaker set connected to the SPEAKERS A and/or SPEAKERS B terminals on the rear panel each time the corresponding button is pressed (see page 12).
  • Page 8: Front Panel Display

    CONTROLS AND FUNCTIONS Front panel display 1 PRESET indicator 4 TUNED indicator Lights up or blinks when using the preset function (see Lights up when this unit is tuned in to an FM or AM page 16). station with a strong signal. 2 MEMORY indicator 5 SLEEP indicator Lights up or blinks when registering radio stations as...
  • Page 9: Rear Panel

    CONTROLS AND FUNCTIONS Rear panel 1 ANTENNA terminals 6 SPEAKERS terminals Used to connect the radio antennas (see page 11). Used to connect speakers (see page 9). 2 Power cable 7 VOLTAGE SELECTOR For connecting this unit to an AC wall outlet (see (Only for General model) page 11).
  • Page 10: Remote Control

    CONTROLS AND FUNCTIONS Remote control 4 Input selector buttons Select the input source you want to listen to. The input source names correspond to the names of the SLEEP connection jacks on the rear panel. 5 TREBLE –/+ LINE 1 LINE 2 LINE 3 Increases or decreases the high frequency response.
  • Page 11 Starts/pauses playback BAND Switches the radio tuner band. Note MEMORY Yamaha does not guarantee the operation of all Bluetooth devices. Stores the current radio station as a preset (see page 16). INFO Only for Europe model: Switches information shown on the front panel display.
  • Page 12: Using The Remote Control

    CONTROLS AND FUNCTIONS Using the remote control ■ Installing batteries ■ Operation range Change all batteries if you notice the operation range of Point the remote control at the remote control sensor on the remote control narrows. Before inserting new this unit and remain within the operating range shown batteries, wipe the battery compartment clean.
  • Page 13: Connections

    CONNECTIONS Connecting speakers and source components Make sure to connect L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.
  • Page 14 CONNECTIONS ■ OUT jacks ■ Bi-wire connection • The OUT jacks output audio signals of the currently Bi-wire connection separates the woofer from the selected input (except when LINE 3 is selected). combined midrange and tweeter section. • Volume level, tone control and balance settings do not A bi-wire compatible speaker has four binding post affect the OUT jacks.
  • Page 15: Connecting The Fm/Am Antennas

    CONNECTIONS Connecting the FM/AM antennas Connecting power cable Plug the power cable into an AC wall outlet after all other Connect the supplied FM/AM antenna to this unit. connections are complete. Fix the end of the FM antenna to a wall, and place the AM antenna.
  • Page 16: Playback

    PLAYBACK Playing a source When finished listening, press A (power) to set this unit to standby mode. Press A (power) to turn this unit on again. • You can also use the buttons or knobs on the front panel if SLEEP A (power) they have the same or similar names as those on the...
  • Page 17: Listening To Music From Your Bluetooth Device

    Notes If you are asked to enter a password, enter the numerals “0000”. • Yamaha does not guarantee all connections between this unit and Bluetooth device. • This unit can be paired with up to 8 Bluetooth devices. When pairing with the 9th device has succeeded, pairing data for the device with the oldest connection date will be deleted.
  • Page 18: Connecting An Already-Paired Device Via Bluetooth

    In the Bluetooth settings of the Bluetooth device, turn Bluetooth on. From the Bluetooth connection list of the Bluetooth device, choose this unit (R-S202 Yamaha). The Bluetooth connection will be established, and the front panel display of this unit will indicate “CONNECTED”.
  • Page 19: Fm/Am Tuning

    FM/AM TUNING You can tune in to a radio station by specifying its frequency or selecting from registered radio stations. Notes • The radio frequencies differ depending on the country or region where this unit is being used. Front panel display illustrations shown in this section are based on Europe model.
  • Page 20: Presetting Stations Manually

    FM/AM TUNING Press TUNER to select the tuner as the input Tune in to the desired FM/AM station. See page 15 for tuning instructions. source. Press MEMORY. Press BAND to select the FM band. “MANUAL PRESET” is displayed briefly on the front panel display, and then the preset number to Press MENU to enter the Option menu.
  • Page 21: Recalling A Preset Station

    FM/AM TUNING ■ Recalling a preset station ■ Clearing a preset station You can recall preset stations that were registered by Follow the steps below to clear a preset station. presetting automatically or manually. SLEEP SLEEP LINE 1 LINE 2 LINE 3 LINE 1 LINE 2...
  • Page 22: Clearing All Preset Stations

    FM/AM TUNING Press ENTER again to confirm. Press TUNER to select the tuner as the input “CLEARED” is displayed on the front panel display. source. Then, another preset station is shown on the front panel display. When there is no more preset station, Press BAND to select the FM/AM band.
  • Page 23: Setting The Option Menu For Each Input Source

    SETTING THE OPTION MENU FOR EACH INPUT SOURCE The Option menu allows you to configure various settings for each input source and recall those settings automatically when an input source is selected. Press one of the Input selector buttons to select the desired input source.
  • Page 24: Troubleshooting

    Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, set this unit to standby mode, disconnect the power cable, and then contact the nearest authorized Yamaha dealer or service center. ■ General...
  • Page 25 The batteries are weak. Replace all batteries. The remote controls for both this unit and Change the remote control ID of the Yamaha AV This unit responds to — the AV receiver have been programmed receiver. For more information, please refer to the the remote control for with the same remote control code.
  • Page 26 TROUBLESHOOTING Problem Cause Remedy page The Bluetooth connection of this unit with Perform Bluetooth connection operations again. No sound is produced the Bluetooth device is disconnected. or the sound is interrupted during This unit and the Bluetooth device are too Move the Bluetooth device closer to this unit.
  • Page 27: Specifications

    The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Handling Bluetooth communications • The 2.4 GHz band used by Bluetooth compatible devices is a radio Corporation is under license.
  • Page 28 Yamaha Global Site Yamaha Downloads Manual Development Department © 2016 Yamaha Corporation Published 03/2016 IP-A0 Printed in Malaysia ZU46020...