For the Fax/Scan and Send function
1
Follow the directions below based on the message that appears on the touch panel display.
● If the message <Scanning will be stopped because the memory is full. Do you want to send the scanned
pages?> appears:
☐ Select [Yes] or [No].
[Yes]: The pages scanned into memory are sent. When sending is complete, scan the remaining originals.
2
[No]: The pages scanned into memory are not sent.
For the Scan and Store function
1
Follow the directions below based on the message that appears on the touch panel display.
● If the message <Scanning will be stopped because the memory is full. Do you want to store the scanned
pages?> appears:
☐ Select [Yes] or [No].
[Yes]: The pages scanned into memory are sent. When sending is complete, scan the remaining originals.
[No]: The pages scanned into memory are not sent.
● If the message <Scanning will be stopped because the memory is full.> appears:
☐ Select [OK].
[OK]: Returns to the Basic Features screen of the function you are using.
2-62
If Memory Becomes Full during Scanning