Canon imageRUNNER ADVANCE 6055 Maintenance Manual page 118

# 861
Cause An error occurred while processing PDL data or image data.
Remedy Confirm the print settings you made when printing from a computer.
# 862
Cause 1 The booklet trays have exceeded their stacking limits. (See Getting Started .)
Remedy Change the print data or print settings, and try printing again.
Cause 2 A combination of settings that is not supported was set.
2
Remedy Change the print data or print settings, and try printing again.
Cause 3 Data that is not guaranteed to be compatible was printed.
Remedy Change the print data or print settings, and try printing again.
# 863
Cause An error occurred while processing PDL data or image data.
Remedy Check the settings, and try printing again.
# 865
Cause A function related to performing jobs is restricted.
Remedy Contact your System Manager.
# 889
Cause You cannot scan or print the document because it has Scan Lock Information embedded.
Remedy Check the Scan Lock Information or contact your System Manager.
# 904
Cause The destination which is registered in [Favorite Settings] cannot be updated even when an address book is acquired from an
imageRUNNER/imagePRESS series connected to the network.
Remedy Register [Favorite Settings] using the touch panel display of the machine.
# 905
Cause You cannot execute the job because some error occurred on the network.
Remedy Check the length of the path, access privilege, and the use of the files or folders.
2-60 List of Error Messages