Canon imageRUNNER ADVANCE 6055 Maintenance Manual page 109

Return page 1 to the top, and then press the [Start] key. (Data for the scanned original has exceeded limits on the size that can be handled by
this machine. Automatically adjust settings and try again.)
Cause Scanning has stopped because the data size of the scanned original exceeds the maximum data size that the machine can handle.
Remedy Try scanning the original again from the first page. If scanning is still not possible, reduce the Sharpness mode setting, and select
[Text] for the original type.
Scanning has stopped because the size of the data for the scanned original exceeds the limit. Scanning may be possible if [Sharpness] is
reduced and the type of original is set to [Text].
Cause Scanning has stopped because the data size of the scanned original exceeds the maximum data size that the machine can handle.
Remedy Reduce the Sharpness mode setting, and select [Text] for the original type.
Place the original on the platen glass.
Cause The specified mode requires that the original be placed on the platen glass, but there is no original on the platen glass.
Remedy Place the original on the platen glass.
Remove the original from the platen glass.
Cause An original remains on the platen glass.
Remedy Remove the original from the platen glass, and place the new original.
Remove the original from the feeder.
Cause The machine cannot scan your original using the feeder. An original is placed in the feeder and on the platen glass.
Remedy Remove the original from the feeder.
Original scanning area (thin glass strip) is dirty.
Cause The feeder's scanning area is dirty.
Remedy Clean the feeder's scanning area. (See "Cleaning the Original Scanning Area of the Feeder (Duplex Color Image Reader Unit), " on p.
1-38.)
Original scanning area (Feeder) is dirty.
Cause The feeder's scanning area is dirty.
Remedy Clean the feeder's scanning area. (See "Cleaning the Original Scanning Area of the Feeder (Duplex Color Image Reader Unit), " on p.
1-38.)
Replace the toner cartridge.
Cause 1 Printing will not be possible soon because the toner is running low.
Cause 2 Printing is not possible because the toner has run out.
Remedy Replace the toner cartridge. (See "Replacing the Toner Cartridge, " on p. 1-10.)
List of Error Messages 2-51
2