4
Close the covers.
5
Clean the feeder scanning area (thin glass strip) and the resin roller.
1. Close the inner cover.
2. Close the feeder cover.
1. Open the feeder.
2. Clean the feeder scanning area with a cloth dampened with
water. Then, wipe the area with a soft dry cloth.
3. Clean the left side of the rubber roller with a cloth dampened
with water. Then, wipe the area with a soft dry cloth.
4. Close the feeder.
Be aware that the light emitted from the platen glass may be very
bright when closing the feeder.
Routine Cleaning (Main Unit)
1-41
1