Canon imageRUNNER ADVANCE 6055 Maintenance Manual page 117

# 854
Cause Device information could not be delivered because the client machine has [Restrict Receiving Device Information] in [Device
Information Delivery Settings] in [Management Settings] (Settings/Registration) set to 'On' .
Remedy Try delivering device information again after setting [Restrict Receiving Device Information] in [Device Information Delivery
Settings] in [Management Settings] (Settings/Registration) to 'Off' . (See e-Manual > Security.)
# 855
Cause Device information could not be delivered because a language that the client machine cannot handle was included in the device
information.
Remedy Contact your local authorized Canon dealer.
#856
Cause The job was canceled because there was not enough free space on the hard disk to store the temporary data.
Remedy Contact your System Manager.
# 857
Cause Data reception timed out, or the job was canceled at the host.
Remedy Check that the network is functioning properly, and then try printing again.
# 858
Cause There is a problem with the print data sent from an external application.
Remedy Check the settings of the data sent to the machine, make sure they are compatible with the machine, and try sending the data
again.
# 859
Cause 1 A compression error occurred with the image data.
Remedy Check the print settings, and try printing again.
Cause 2 An original was not scanned properly, or the orientation of the original was incorrect.
Remedy1 Check the scan settings, and try scanning again.
Remedy2 Turn the main power OFF, wait for 10 or more seconds, and turn the main power back ON.
# 860
Cause 1 A paper jam occurred during printing.
Remedy Try printing again.
Cause 2 You tried to print on a transparency sheet not made for this machine.
Remedy Load transparencies made for this machine into the machine, and then try printing again.
Cause 3 A print job using a PDL that is not supported by this machine was inserted.
Remedy Confirm the PDLs supported by this machine with your system administrator, and use the appropriate printer driver.
List of Error Messages 2-59
2