Srs Components And Functions - Hyundai 2012 Santa Fe Owner's Manual

11
11
12 12
10 10
OCM030200N

SRS components and functions

The SRS consists of the following com-
ponents:
1. Driver's front air bag module
2. Front impact sensors
3. Passenger's front air bag module
4. Retractor pre-tensioner assemblies
5. Side impact sensors
6. Curtain air bag modules
7. Side impact air bag modules
8. SRS control module (SRSCM)/
Rollover sensor
9. Air bag warning light
10. PASS AIR BAG "OFF" indicator
(Front passenger's seat only)
11. Occupant classification system
(Front passenger's seat only)
12. Driver's seat track position sensor
13. Driver's and front passenger's seat
belt buckle sensors
13 13
Safety systems of your vehicle
The SRSCM continually monitors all
SRS components while the ignition
switch is ON to determine if a crash
impact is severe enough to require air
bag deployment or pre-tensioner seat
belt deployment.
The SRS air bag warning light on the
instrument panel will illuminate for about
6 seconds after the ignition switch is
turned to the ON position, after which the
air bag warning light should go out.
WARNING
If any of the following conditions
occurs, this indicates a malfunction
of the SRS. Have an authorized
HYUNDAI dealer inspect the air bag
system as soon as possible.
• The light does not turn on briefly
when you turn the ignition ON.
• The light stays on after illuminat-
ing for approximately 6 seconds.
• The light comes on while the
vehicle is in motion.
• The light blinks when the ignition
switch is in ON position.
3 37