Cruise Control System - Hyundai 2012 Santa Fe Owner's Manual

Hide thumbs Also See for 2012 Santa Fe:
Table of Contents

Advertisement

Driving your vehicle

CRUISE CONTROL SYSTEM

1. Cruise indicator
2. Cruise set indicator
The cruise control system allows you to
program the vehicle to maintain a con-
stant speed without resting your foot on
the accelerator pedal.
This system is designed to function
above approximately 25 mph (40 km/h).
5
34
WARNING
• If the cruise control is left on,
(CRUISE indicator light in the
instrument cluster illuminated),
the
cruise
switched on accidentally. Keep
the cruise control system off
(CRUISE indicator light OFF)
when the cruise control is not in
use, to avoid inadvertently set-
ting a speed.
• Use the cruise control system
OCM050100E
only when traveling on open
highways in good weather.
• Do not use the cruise control
when it may not be safe to keep
the vehicle at a constant speed,
for instance, driving in heavy or
varying traffic, or on slippery
(rainy, icy or snow-covered) or
winding roads or over 6% up-hill
or down-hill roads.
• Pay particular attention to the
driving
conditions
using the cruise control system.
• Be careful when driving downhill
using the cruise control system,
which may increase the vehicle
speed.
During cruise-speed driving of a
manual transaxle vehicle, do not
shift into neutral without depress-
ing the clutch pedal, since the
control
can
be
engine will be overrevved. If this
happens, depress the clutch pedal
or release the cruise control ON-
OFF switch.
✽ ✽ NOTICE
During normal cruise control operation,
when the SET switch is activated or
reactivated after applying the brakes,
the cruise control will energize after
approximately 3 seconds. This delay is
normal.
whenever
CAUTION

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents