Listening To The Vehicle Radio; Tuning A Station - Hyundai 2012 Santa Fe Owner's Manual

Also you can select the CATEGORY or
CHANNEL function by using FF> and
<REW buttons. After the focus locates at
the CATEGORY or CHANNEL icon,
pressing the NEXT or
ton will activate the category up or down,
channel up or down function. When the
focus on the CATEGORY, if you press
the ENTER button and move the focus
on the CHANNEL icon, you can select
the channel up or down function in the
current category by pressing the
NEXT or PREV buttons.
Move the focus on the SCAN icon, you
can activate the scan function by press-
ing the ENTER button. If meantime, the
CATEGORY icon been highlighted,
above operation will activate the scan
function in the current category.

Listening to the Vehicle Radio

To control the vehicle radio from the RSE
control panel or remote control, press the
SOURCE button on the remote control or
PREV but-
the SRC button on the RSE control
panel, then select the desired play mode
on the source change operation. Finally,
press the ENTER button to complete the
selection.
The RSE monitor status display and the
RSE control panel will indicate the
selected source.
Features of your vehicle

Tuning a Station

While the vehicle radio is the current
source, press the NEXT or
button on the RSE control panel or
remote control once to search up or
down for the next available station. When
the tuner finds a station it will stop at the
station and start to play.
Press the NEXT or PREV button
to seek up or down through all radio sta-
tions. When the radio finds a station, it
will stop and play that station.
Press the FF > or < REW button to man-
ually tune up or down one channel. Press
and hold the FF > or < REW button to
continue tuning up or down.
Pressing a number on the remote control
keypad will tune to the corresponding
preset station. For example, if 89.7 has
been stored as preset 1 (CH1), then
pressing the 1 button on the keypad will
tune to that station.
PREV
4 157