Table of Contents
Advertisement
Driving your vehicle
When operating
When the ESC is in operation,
the ESC indicator light blinks.
• When the Electronic Stability
Control is operating properly,
you can feel a slight pulsation
in the vehicle. This is only the
effect of brake control and indi-
cates nothing unusual.
• When moving out of the mud
or driving on a slippery road,
pressing
the
pedal may not cause the
engine rpm (revolutions per
minute) to increase.
5
30
E070502AUN-EE
ESC operation off
ESC OFF state
• To cancel ESC operation,
press the ESC OFF button
(ESC OFF indicator light illu-
minates).
• If the ignition switch is turned
to LOCK position when ESC is
off, ESC remains off. Upon
restarting the engine, the ESC
accelerator
will automatically turn on
again.
■ ESC indicator light
■ ESC OFF indicator light
E070503BFD
Indicator light
When ignition switch is turned to ON, the
indicator light illuminates, then goes off if
the ESC system is operating normally.
The ESC indicator light blinks whenever
ESC is operating or illuminates when
ESC fails to operate.
The ESC OFF indicator light comes on
when the ESC is turned off with the button.
CAUTION
Driving with varying tire or wheel
sizes may cause the ESC system to
malfunction. When replacing tires,
make sure they are the same size as
your original tires.
Hide quick links:
Advertisement
Table of Contents
