Standard Meter Tab - Dranetz PowerGuide 4400 User Manual

Standard Meter Tab

Standard Meter Tab
Standard meter
list
3-6
1.800.561.8187
Meter mode can be displayed by pressing the Meter icon on the Home screen. At start-
up, meter mode defaults in the Standard tab featuring the basic power quality
parameters available. The standard metering properties include Voltage, Computed
Basic, Power, Demand, Energy, Harmonics and Flicker as shown below.
Standard Tab
Basic Volts
(for A, B, C, D) NOTE: Some voltage channel meter
values are derived based on the
circuit type selection. The values
will change depending on the wiring
configuration setup.
Ampere
Computed Vector Displacement Power Factor
Basic
Arithmetic Displacement Power
Factor
Residual Current
Net Current
Power Watts
(for A, B, C, D,
Volts Ampere
Total)
Volts Ampere Reactive
True Power Factor
Displacement Power Factor
NOTE: See Appendix B Technical Specifications - Computed Parameters on page B-6
for definition of parameters.
www.
MARK301pg
Parameter Name
information@itm.com
.com
Label
Volts
Amps
Vector Displacement PF
Arithmetic Displacement
PF
Residual Current
Net Current
W
VA
VAR
TPF
DPF
Continued on next page