Power-On Sequence - Dranetz PowerGuide 4400 User Manual

Power on
sequence
Home screen
features
1.800.561.8187
Follow these steps to turn on the 4400 and display the Home screen.
Step
1 Connect ac adapter/battery charger plug into the right side of 4400.
2 Plug the ac adapter into an ac power source.
3 Press the 4400 On/Off power button to turn the unit on.
Result: The Home screen will be displayed.
Home screen is frequently referenced as the starting point for all major functionalities
of the 4400.
The date and time appear on the top right corner of the Home screen. Both can be
configured to appear in a different format. See page 4-3 for the procedure on how to set
and reformat time and date.
The unit name and model, 4400 program revision level, and status messages appear in
the upper portion of the Home screen. Pertinent information that appear in the status
message area are the monitoring status, circuit configuration, percentage of data card
used while monitoring, site/file name, number of event cycles saved, and number of
timed intervals saved.
MONITORING STATUS: OFF indicates that the instrument is not actively
monitoring data. The monitoring status message will change to ON, DONE or
ARMED, depending upon the state of data monitoring. See page 5-25 for the
procedure on how to turn monitoring on/off.
Home screen contains the icons used to access the various 4400 functions. See page
1-16 for the description of each icon found in Home screen.
www.
Action
information@itm.com
.com
CH 1/ Getting Started
MARK001b
1-15