Maintenance - bem wireless MOJO II User Manual

Troubleshooting (cont.)
"R" speaker by sliding the switch on the bottom of each
speaker.
• Be sure to make your mode selection (Mono or Stereo) while
the speakers are powered off. Then turn them on.
Issue: Interference or static during playback
Solution:
• Avoid using the device between concrete or other building
structures that may interfere with the signal.
• Please check if the battery level of the unit and the
Bluetooth© device and charge if necessary.
For more troubleshooting help go to http://bemwireless.com

Maintenance

Please follow the instructions below for cleaning your
Speaker Mojo II
• Power off the unit and unplug the power adapter from
wall outlet
• Use a soft, dry, lint-free cloth and wipe gently
• Do not use alcohol, benzene, thinners or other chemical
detergents as these can cause the casing to be warped
or discolored
For questions, comments or to purchase more be ¯ m wireless
products go to bemwireless.com
14
I
mportant
: S S m
elect peaker
p
ode rIor to turnIng on
S ( )
peaker S