bem wireless MOJO II User Manual page 8

Play Modes (Cont.)
Single Speaker
Bluetooth mode: Play an audio
•
signal from the connected
Bluetooth device. Before turning
the Speaker Mojo II on, turn the
speaker over so that the bottom
of the speaker is facing up. Locate
the stereo switch (L,M,R) on the speaker and make sure that
it is set to the "M" or mono setting.
• Now turn on the Speaker Mojo II. Once the Speaker Mojo II
has entered Bluetooth mode, the Bluetooth icon will light
up blue and the tone confirming that the unit is currently in
Bluetooth pairing mode will sound.
• Go to the Bluetooth settings on your smart device to find
the device named "Mojo II". A tone will sound to confirm the
device has paired successfully. Next time the Speaker Mojo II
and connected device will pair automatically.
Please note: Mojo II will not show up as an available device
unless you have set the stereo switch to "M". Your device
must be within 40 feet of the speaker while in bluetooth
mode.
Direct Connection Mode (Aux In): To play music via direct
•
connection simply insert the included Aux cable into the Aux
in port on the back of the Speaker. Direct connection mode is
not supported in Stereo Mode.
8
I : S
mportant
S m
elect peaker ode
p
rIor to turnIng on
L R
M
S ( )
peaker S