bem wireless MOJO II User Manual page 5

Charging Modes (Cont.)
Indicator on power cradle
• Red LED : Charging, it will go off when it is fully charged;
• Blue LED : power output is on.
3. Wireless Conductive Charging via Power Cradle
Connect the standard USB end of the
supplied USB cable to a USB power
source (PC, USB power adapter...
etc.). Connect the Micro USB jack
to the USB charging port on the
power cradle. The charging indicator
will light up while charging. If you
put Speaker Mojo II onto the power
cradle, it will charge them both at the
same time whether you connect the power to the Speaker Mojo
II or power cradle. It will take about 5 hours for charging them at
the same time. Once both are fully charged, the battery life of the
Speaker Mojo II can be doubled. This can be done by turning on
the power cradle, placing the Speaker Mojo II on the cradle and
turning it on while playing music.
Please note, the Speaker Mojo II LED charging indicator will not
light up when the speaker is charging on the Power Cradle
I : S
mportant elect
S m p
peaker ode rIor to turnIng on
5
S ( )
peaker S