bem wireless MOJO II User Manual

Hide thumbs

Table Of Contents

Table of Contents

Summary of Contents for bem wireless MOJO II

Page 2: Product Overview
Also compatible with any device that has a standard 3.5mm earphone jack such as MP3 players, PSP, mobile phones, etc. Meet the Speaker Mojo II Before learning about your Speaker Mojo II, take a moment to look it over and familiarize yourself with its features. mportant...
Page 3 Product Interface Speaker Mojo II 1. Microphone 2. Volume + 3. Volume – 4. Play / Pause /Speak- erphone 5. Power Cradle 6. On/ Off switch 7. Bluetooth indicator © 8. Aux in 9. Micro USB power port 10. Power indicator Power Cradle 11.
Page 4: Charging Modes
USB cable to a USB power source (PC, USB power adapter…etc.). Connect the Micro USB jack to the USB charging port on the Speaker Mojo II. It will take about 2 hours to fully charge the Speaker Mojo II alone.
Page 5 II or power cradle. It will take about 5 hours for charging them at the same time. Once both are fully charged, the battery life of the Speaker Mojo II can be doubled. This can be done by turning on the power cradle, placing the Speaker Mojo II on the cradle and turning it on while playing music.
Page 6: Play Modes
Important: Before you go to turn on the Speaker Mojo II please stop and read these instructions carefully. The Speaker Mojo II can be played in a couple of different ways. Mono mode will allow you to work with just one speaker or stereo mode which allows you to pair up two speakers.
Page 7 Power on / Power off Slide the power switch to “on” to turn on the Speaker Mojo II. The Bluetooth indicator will light up blue to signify the unit is on and ready to be paired. Slide the power switch to “off” to turn off the unit and the Bluetooth indicator light will go out.
Page 8 “M” or mono setting. • Now turn on the Speaker Mojo II. Once the Speaker Mojo II has entered Bluetooth mode, the Bluetooth icon will light up blue and the tone confirming that the unit is currently in Bluetooth pairing mode will sound.
Page 9 Bluetooth mode: The Speaker Mojo II has • the ability to be connected together with another Speaker Mojo II to enter into stereo speaker mode. To enter into stereo speaker mode, begin by selecting either one of the Speaker Mojo II speakers and slide the stereo switch on the bottom of the speaker to “L”...
Page 10 Play Modes (Cont.) • Note: If you are in Stereo Mode and the “R-speaker” disconnects due to being too far apart, the music playing on the “L-speaker” will pause. In stereo mode the speakers can be no more than 20 feet apart from each other.Once you are back in the above range of operation for the two speakers, they will reconnect by themselves automatically .When paired successfully again, there will be indication sound signaling a...
Page 11: Operation Details
Follow the connection steps to pair a Bluetooth device with © the Speaker Mojo II. At this point you can send any kind of audio signal to your speaker (music, video, gaming, etc.). Just use your device as normal and the audio will play through your Speaker Mojo II.
Page 12 Operation Details (cont.) Speaker Phone After pairing your mobile phone to Speaker Mojo II with Bluetooth, the speaker phone function can be used. • Making a call: Call will automatically transfer to the speakerphone. If not, tap play/pause button; •...
Page 13: Troubleshooting
Troubleshooting Issue: Pairing is unsuccessfully after multiple attempts Solution: • Check if the Bluetooth indicator light is on. If the indicator light is off, please press the power button to turn the unit on. If the Bluetooth indicator light still doesn’t come on after pressing the power button, please charge the unit.
Page 14: Maintenance
Please check if the battery level of the unit and the Bluetooth© device and charge if necessary. For more troubleshooting help go to http://bemwireless.com Maintenance Please follow the instructions below for cleaning your Speaker Mojo II • Power off the unit and unplug the power adapter from wall outlet •...
Page 15 Storage • Power off the Speaker Mojo II If the unit will not be used for an extended period of time. • Do not set the unit in a damp environment, high temperatures or in direct sunlight. More Info For questions, comments or to purchase more be ¯ m wireless products go to: bemwireless.com...
Page 16: Fcc Statement
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
Page 17: Technical Specifications
Technical Specifications Note: All specifications are subject to change without notice Product Name : Speaker Mojo II Model Number : HL2750 Power Supply: 5V,1A Output Power: 1.5W X 2 USB charging output: 5V,1A x 2 Bluetooth V2.1+EDR , profile Supported: A2DP, AVRCP Working Range: Approximately 40ft, 12m Working atmosphere: 0˚C-40˚C / 20%-90%RH...
Page 18: Safety Instructions
Safety Instructions This product is specially designed based on the full attention to safety; in order to make sure the accident-free operation, please abide the guidelines listed below: • Always position the unit on a stable and level surface. Unstable surface can cause the unit to topple and fall, resulting in possible damage or injury •...
Page 19 Safety Instructions (cont.) Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

bem wireless MOJO II User Manual

Table of Contents

Related Manuals for bem wireless MOJO II

Summary of Contents for bem wireless MOJO II

Table of Contents