Charging Modes - bem wireless MOJO II User Manual

Charging Modes

1. Direct Speaker Charge
Connect the standard USB end of the
supplied USB cable to a USB power source
(PC, USB power adapter...etc.). Connect
the Micro USB jack to the USB charging
port on the Speaker Mojo II. It will take
about 2 hours to fully charge the Speaker
Mojo II alone.
Charging Indicator Light Modes
Power indicator on Speaker Mojo II
• Red LED: Speaker Mojo II is charging;
• No LED: Battery is fully charged
• Note: When the battery is low, you will hear a tone signaling
you to charge the unit soon
2. Power Cradle Charge
The Power cradle is a backup battery pack
for Speaker Mojo II and your Bluetooth
device. Connect the standard USB end of the
supplied USB cable to a USB power source
(PC, USB power adapter...etc.). Connect the
Micro USB jack to the USB charging port on
the power cradle. The charging indicator will
light up while charging. It will take about 3 hours to fully charge
the power cradle.
4
I : S
mportant
S m
elect peaker ode
p
rIor to turnIng on
S ( )
peaker S