Troubleshooting; Maintenance - bem wireless mobile speaker User Manual

Operation Details
Connect the Mini USB jack to the USB charging port on the unit. The
charging indicator on the Mobile Speaker will light up while charging
It will take about 2 hours to fully charge the Mobile speaker
Charging Indicator Light Modes
•
Red LED / Flashing Fast: Battery is low, charge the unit soon.
•
Red LED / Flashing Slow: Mobile Speaker is charging
•
Green LED: Battery is fully charged
Note: if the unit has not been used in the past 7 days please charge
for 10 minutes before using the Mobile Speaker.

Troubleshooting

Issue: Pairing is unsuccessfully after multiple attempts
Solution:
•
Check if the Bluetooth© indicator light is on. If the indicator
light is off, please press the power button to turn the unit on.
If the Bluetooth© indicator light still doesn't come on after
pressing the power button, please charge the unit.
•
Check for other Bluetooth© devices around the surroundings
that may interfere with searching and turn devices off.
•
Power off and then power on the unit to restart the Bluetooth©
8
(cont.)
function of the unit or your Bluetooth device
•
Unplug any cables plugged into the AUX IN, restart all devices
and then attempt pairing again.
Issue: Interference or static during playback
Solution:
•
Avoid using the device between concrete or other building
structures that may interfere with the signal.
•
Please check if the battery level of the unit and the Bluetooth©
device and charge if necessary.
For more troubleshooting help go to http://bemwireless.com

Maintenance

Please follow the instructions below for cleaning your Mobile Speaker
•
Power off the unit
•
Use a soft, dry, lint-free cloth and wipe gently
•
Do not use alcohol, benzene, thinners or other chemical
detergents as these can cause the casing to be warped or
discolored
9