Valor 719 Owner's Manual page 11

Inset live fuel effect
Hide thumbs Also See for 719:
Table of Contents

Advertisement

OWNER GUIDE
4. Place a type "B" coal between the
front and rear base coals as shown in
figure 7. The letter "B" should be
upright.
5. Place a type "A" coal between the
front and rear base coals with the
letter "A" upright. The top of the coal
Figure 7.
should rest against the centre coal
of the rear base coal as shown in
figure 8.
6. Place the remaining type "B"
coal at the right side of the firebox
between the front and rear base
coals. The letter "B" should be
Figure 8.
upright. The coal should touch the
right side of the firebox. See figure 9.
7. Place the remaining type "A" coal
between the front and rear base coals.
The letter "A" should be upside down
with its rear face between the right
and centre coals of the rear base coal.
Figure 9.
Angle the coal so that the gap
between it and the type "B" coal
to its right is appreciably larger
than the gap between it and the
type "A" coal to its left but do not
have it touching the type "A" coal.
This will give the best flame
effect. See figure 10.
Figure 10.
Page 11

Advertisement

Table of Contents
loading

Table of Contents