GE AJEM 10 Owner's Manual And Installation Instructions page 6

Appearance may vary.
On
Off
Timer
On Off
Air Conditioner Controls
Lights beside the touch pads on the air conditioner
control panel indicate the selected settings.
Controls
1. ON/OFF
Turns air conditioner on and off.
2. Display
Displays the temperature setting. Displays hours when
setting the timer.
3. MODE
On the air conditioner controls, use to set COOL, HEAT or
FAN mode. Indicator lights on the air conditioner controls
will show the mode selected.
4. TEMP Increase + /Decrease – Pads
Use to set temperature when in COOL or HEAT mode.
5. FAN Speeds
Use to set the fan speed at LOW or HIGH. Indicator lights
will show the speed selected.
Remote Control
To ensure proper operation, aim the remote control at the
signal receiver on the air conditioner.
The remote control signal has a range of up to 21 feet.
6
Cool
Mode
Fan
Heat
Hi
Low
Temp
Power
Fan
On/Off
TIMER
6.
When the air conditioner is off, it can be set to
automatically turn on in half an hour to 24 hours at its
previous setting. Each touch will set the time in half hours
up to 10 and then in hours up to 24.
To cancel the On Timer, press the ON pad until "CL"
appears. Then wait until the display turns off.
When the air conditioner is on, it can be set to
automatically turn off in half an hour to 24 hours. Each
touch will set the time in half hours up to 10 and then in
hours up to 24.
To cancel the Off Timer, press the OFF pad until "CL"
appears and wait for the set temperature to be displayed.
The unit will now resume normal operation.
7. Remote Control Signal Receiver
NOTE: When the air conditioner is turned on, it will
automatically start in the setting last used
Make sure nothing is between the air conditioner and the
remote control that could block the signal.
the Care and Cleaning section.
Remote Control
.