Fitting The Ceramic Fuel Effect - Baxi 940 Installer And Owner Manual

INSTALLER GUIDE
Figure 26. Ceramic side walls installation

12. FITTING THE CERAMIC FUEL EFFECT

The fitting guide for the ceramic fuel effect is supplied with the ceramic fuel effect. It is
important that the fitting guide for the ceramic fuel effect be placed inside or attached
to this guide and handed to the customer following completion of the 'final review'
section.
Ensure that the fire is OFF. Open the isolating valve at the inlet 'T' connector and
replace the end cap. Light the fire, turn to the maximum output position and test
around the sealing screw for gas soundness with a suitable leak detection fluid.
©
Page 27
Baxi Heating U.K. Limited 2010.