Baxi 741 Owner's Manual page 10

OWNER GUIDE
2. Place the ceramic front coal in position in
front of the base coal. The front of the
ceramic coal should touch the front of the
burner module (See figure 5).
The loose ceramic coals are supplied in three
sizes. There are two large ceramic coals, three
medium ceramic coals and 12 small ceramic
coals. When installing the ceramic coals
smooth surfaces should be positioned to the
bottom or rear unless stated otherwise. Install
the loose coals as follows.
3. Locate the two large ceramic coals at the
ends of the front base ceramic coal. The large
ceramic coals have two sides that are smooth.
Locate one smooth side along the side of the
hotbox and the other to the rear (See figure
6).
4. The top surface of the front ceramic base
coal has three 'V' shaped indents.
Locate a small ceramic coal into each indent
Figure 5. Front coal location
(See figure 6).
Figure 6. First row of ceramic coals
Page 10