HYOSUNG RT 125 D Service Manual page 28

ENGINE REMOVAL AND REMOUNTING
ENGINE REMOUNTING ...................................................... 28 (3-5)
UPPER END COMPONENTS OF ENGINE DISASSEMBLY
UPPER END COMPONENTS OF ENGINE INSPECTION
AND SERVICING
UPPER END COMPONENTS OF ENGINE REASSEMBLY
LEFT END COMPONENTS OF ENGINE DISASSEMBLY
RIGHT END COMPONENTS OF ENGINE DISASSEMBLY
LOWER END COMPONENTS OF ENGINE DISASSEMBLY
LOWER END COMPONENTS OF ENGINE INSPECTION
AND SERVICING
LOWER END COMPONENTS OF ENGINE REASSEMBLY
RIGHT END COMPONENTS OF ENGINE REASSEMBLY
LEFT END COMPONENTS OF ENGINE REASSEMBLY
Mark an identification of assembly location on each removed part so that each will be restored to the
original position during reassembly.
Wash clean and dry the removed parts before inspecting and measuring.
Oil the rotating or sliding parts before assembly.
Make sure to use the correct type of lubricant where specified.
Check that each rotating or sliding part moves or operates smoothly after assembly.
Make sure to follow the bolt tightening order where specified.
If the correct length of the bolt is confused when tightening the crankcase or cover, insert all the bolts
and check that the tightening margin is equal in each bolt.
ENGINE
CONTENTS
............................................................... 34 (3-11)
............................................................... 63 (3-40)
CAUTION
27
........................... 28 (3-5)
29 (3-6)
44(3-21)
54 (3-31)
57 (3-34)
60 (3-37)
66 (3-43)
71 (3-48)
75 (3-52)
3