Removing The System-Board Assembly; Prerequisites; Procedure - Dell INSPIRON 15 5500 Service Manual

Removing the system-board
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You
must enter the Service Tag in the BIOS setup program after you replace
the system board.
NOTE: Replacing the system board removes any changes you have
made to the BIOS using the BIOS setup program. You must make the
appropriate changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect the cables
correctly after you replace the system board.

Prerequisites

1 Remove the
2 Remove the
3 Remove the
4 Remove the
5 Remove the battery.
6 Remove the
7 Remove the

Procedure

1 Remove the screws that secure the right display hinge to the palm rest
and keyboard assembly.
computer. After working inside your
optical drive.
base cover.
I/O board.
hard drive.
memory modules.
wireless card.
After working inside your
55