Removing The System-Board Assembly; Prerequisites - Dell Inspiron 17 5000 Service Manual

GUID-D0608F72-3719-40C9-9E39-5E8A890255A7
Removing the system-board
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You must
enter the Service Tag in the BIOS setup program after you replace the
system board.
NOTE: Replacing the system board removes any changes you have made to
the BIOS using the BIOS setup program. You must make the appropriate
changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect the cables correctly
after you replace the system board.
GUID-FF0965BC-173B-458F-BC1D-2EB7212493E0

Prerequisites

1 Remove the optical
2 Remove the base
3 Remove the battery.
4 Remove the wireless
5 Remove the memory
6 Remove the display
computer. After working inside your computer, follow
After working inside your
drive.
cover.
card.
modules.
assembly.
computer. For more safety best
www.dell.com/
Before
69