Replacing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Connect the battery cable to the system board, if applicable.
2
Place the base cover on the palm rest and keyboard assembly and snap
the base cover into place.
3
Replace the screws that secure the base cover to the palm rest and
keyboard assembly.
Post-requisites
Replace the
optical
computer. After working inside your
drive.
After working inside your
23