Removing the touch pad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Remove the
3
Remove the
4
Remove the
5
Remove the battery.
6
Follow the procedure from step 1 to step 2 in
board".
7
Remove the
8
Remove the
9
Remove the
10 Remove the
Procedure
1
Open the latch and disconnect the keyboard backlight cable from the
system board.
2
Peel the status-light board cable and keyboard backlight cable off the
touch pad.
66
computer. After working inside your
optical
drive.
base
cover.
I/O
board.
hard
drive.
memory
modules.
wireless
card.
system-board
assembly.
heat-sink
assembly.
After working inside your
"Removing the status-light