Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Connect the camera cable to the camera module.
2
Using the alignment post adhere the camera module on the display
assembly and snap it into place.
Post-requisites
1
Replace the
display
2
Replace the
display
3
Replace the
base
4
Replace the
optical
82
computer. After working inside your
bezel.
assembly.
cover.
drive.
After working inside your