Connecting A Dvd Burner To Copy To/Play Back A Disc; Preparing For Copying/Playing Back - Panasonic HDC-SD100 Operating Instructions Manual

With other
products
Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by connecting a
DVD burner VW-BN1 (optional) to this unit using a Mini AB USB Connection Cable (supplied with
VW-BN1). The copied DVD disc can also be played back.
p Please read the operating instructions of the DVD burner for how to use it.
1
p You cannot supply power to the DVD burner from this unit.
2
92
VQT1T90
Downloaded From CamcorderManual.com Panasonic Manuals
1
Connecting a DVD burner to
copy to/play back a disc

Preparing for copying/playing back

We recommend using Panasonic DVD burner VW-BN1.
About discs that can be used for copying
*1
Copy to a new 12 cm DVD-RAM, DVD-RW, DVD-R or DVD-R DL.
You can additionally copy only to a DVD-RAM.
p You cannot copy to 8 cm discs or KRW/KR/KR DL/CD-RW/CD-R.
p We recommend using the discs that have been recommended in the operating instructions of the
DVD burner. Refer to the operating instructions of the DVD burner for details about recommended
discs, disc handling etc.
p Message [CANNOT COPY TO DISC WITH RECORDED IMAGES. INSERT DISC WITH NO
RECORDED IMAGES.] may be displayed when a new DVD-RAM is used. In that case, format the
DVD-RAM with the DVD burner before use. (F 98)
*1 You cannot record on a disc that has already been used. However if a DVD-RAM or a DVD-RW
is formatted with the DVD burner, then it can be used for copying. Please be aware that if a disc
is formatted, then all the data recorded on the disc will be erased.
*2 Only DVD-RAM copied with the DVD burner or HD Writer 2.6E can additionally copy. You cannot
copy motion pictures and still pictures to the same disc, so only motion pictures can be copied to
a DVD-RAM with motion pictures copied, and only still pictures can be copied to a DVD-RAM
with still pictures copied.
Connect the AC adaptor (supplied with VW-BN1) to the DVD burner.
Connect this unit to the AC adaptor and set the mode dial to
*2
.