Changing The Picture Quality On The Lcd Monitor; Adjusting The Viewfinder Field Of View; Recording Showing The Contents To A Partner - Panasonic HDC-SD100 Operating Instructions Manual

1
2
[DYNAMIC]:
The image on the LCD monitor becomes clear
and vivid. Optimum contrast and brightness are
set depending on the scenes recorded. Clear
and brilliant images are presented.
[NORMAL]:
Switches to the standard picture quality.
p When the brightness of the LCD monitor is
Adjust the focus by rotating the
eyepiece corrector dial.
30
VQT1T90
Downloaded From CamcorderManual.com Panasonic Manuals
Changing the picture quality
on the LCD monitor
Set the AUTO/MANUAL switch to
MANUAL (F 58)
Select the menu. (F 22)
[SETUP] [LCD AI] [DYNAMIC] or
[NORMAL]
increased (when the [POWER LCD] is set to
[ ] or [ ]), or when the AUTO/MANUAL
+ 1 + 2
switch is set to AUTO, it is set to [DYNAMIC],
and the setting cannot be changed.
Adjusting the viewfinder
field of view
Recording showing the
contents to a partner
 Rotate the mode dial to select
Rotate the LCD monitor towards the
lens side.
p Both the LCD monitor and the viewfinder are
turned on during the face-to-face recording
regardless of the position of the LCD/EVF
select switch.
p The image is horizontally flipped as if you see
a mirror image. (However the image recorded
is the same as a normal recording.)
p Record by viewing the image in the viewfinder
during the face-to-face recording.
p Only some indications will appear on the
screen. When [Z] appears, return the
direction of the LCD monitor to normal position
and check the warning/alarm indication.
(F 119)
p Following settings cannot be made during the
face-to-face recording. Return the LCD monitor
to normal position before making the settings.
LPOWER LCD
LLCD SET
.