Selecting A Mode (Turning The Unit On/Off); Turning The Power On And Off With The Lcd Monitor - Panasonic HDC-SD100 Operating Instructions Manual

Setup
Rotate the mode dial to switch to recording, playback or power OFF.
Turn on the power by turning the mode dial to
lock release button
The status indicator lights and the power turns on.
p When the unit is turned on for the first time, a message asking you to set the date and time will
To turn off the power
Set the mode dial to OFF.
The status indicator
When the mode dial is set to
when the LCD monitor is opened, and power is turned off when it is closed.
p When the LCD/EVF select switch is set to EVF, power will not turn on/off with the opening and closing
w To turn on the power
Downloaded From CamcorderManual.com Panasonic Manuals
3
Selecting a mode
(Turning the unit on/off)
.
appear. Select [YES] and set the date and time. (F 26)
goes off and the power turns off.
Recording mode (F 35, 40)
Playback mode (F 70, 75)
OFF

Turning the power on and off with the LCD monitor

of the LCD monitor.
The status indicator lights.
LCD/EVF select switch
Set the mode dial to OFF when this unit is not being used.
p Rotate the mode dial while at the same
time pressing in the lock release button if
changing from OFF to another mode.
p Status indicator
p Align with the mark
, and the LCD/EVF select switch is set to LCD, power is turned on
w To turn off the power
The status indicator goes off.
or while pressing the
.
VQT1T90
21