Danfoss AK-PC 560 User Manual page 21

Override
The controller contains a number of functions that can be used to-
gether with the override function in the master gateway. They can
therefore only be used in combination with data communication.
Function via data communication
Stop of injection when the compressor is
stopped
Night setback
Suction pressure optimisation
The system unit registers the refrigeration point which handles the largest capacity (requires the
lowest suction pressure). The parameter may be logged for use in a service situation.
AK-PC 560
Functions to be used in the system units
override function
Forced Close / Injection ON / AKC ON
Day/night control and time schedule
P0 optimisation
Manual RS8GE202 © Danfoss 01-2016
Selection of parameter in AK-PC 560
084B8013 Sw. 1.0x
- - - MC Inject ON
r27 NightSetback
Select controller address
(The parameters are found automatically and
do not become visible).
- - - MLC
21