Upnp - Tenda FH456 User Manual

❶
Check the Enable option to enable the feature.
❷
Select the service provider of your DDNS account,

Type the DDNS host name, username, and password in the corresponding boxes: tenda,
12345678 and tenda.dyndns.org.

Click OK on the bottom of the page to activate the settings.
When it's connected successfully, you can use the domain name
WAN IP address of the Router. For example, you can use
ftp://183.37.211.8:21 to visit FTP server when you use Port Forwarding feature.
Note
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), the DDNS feature
does not work because private addresses are not routed on the Internet.

UPnP

When UPnP is enabled on your Router, a network device possessing a specific purpose can be
identified and used automatically by another computer or device in your network.
Log in to the Router's User Interface, and click Advanced > UPnP.
It is advisable to keep the default settings.
58
1
2
3
dyndns.org here.
tenda.dyndns.org
ftp://tenda.dyndns.org:21
Specify Additional Settings
to replace the
instead of