Maintenance; Storage; Other Reminders; Attention - Peak PAC Auto PAC 300 Operation Manual

Strapping machine
Table of Contents

Advertisement

(5) Maintenance

a. Turn off the power before removing either of the top covers.
b. The heater tongue is very hot; do not touch it.

(6) Storage

a. The store room must be dry.
b. Do not expose the machine to extreme cold or heat environment.
c. Place the machine on an even floor in order to avoid any distortion.

(7) Other Reminders

a. A operation manual must remain attached to the machine at all times.
b. Do not alter the equipment or circuitry unless authorized to do so by the manufacturer.

(8) Attention

When the machine arrives in your warehouse, you need to use a forklift to take it off from
the pallet. If you could go down to the bottom side of the machine, you would see an
indication sticker as follows: (TP-601L)
Follow this sticker and lead the teeth of a forklift to that indicated position. After making
few distance adjusting, you then could drive the teeth in and take off the machine.
Warning for danger!
Do not put your hands or body
into arch working area when
machine is operating.
- 2 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents