(4) Amount of strap in Accumulator Box
a. TP-601D
The machine has already been set in its Accumulator Box.
However, some adjustment may be required, depending on the actual quality or
thickness of the strap used. If adjustment is necessary, proceed as shown in the
following drawing.
a-1. In case that there is an insufficient amount of strap in the Accumulator Box,
loosen the Nut
a-2. In case that there is an excessive amount of strap in the Accumulator Box, loosen
the Nut
○
and turn the Screw Bolt
27
○
and turn the Screw Bolt
27
○
28
○
clockwise.
28
- 23 -
counterclockwise.