General Safety Remarks; Basic Operation; Basic Safety Precautions; Safety Instructions Governing Specific Operational Phases - Peak PAC Auto PAC 300 Operation Manual

3. General Safety Remarks

(1) Basic Operation

The machine is only to be operated when in good running condition and in accordance
with the instructions provided in the operation manual. Operators must be trained in
proper operation and safety of the equipment.
The machine may only be operated in accordance with its designated use.

(2) Basic Safety Precautions

In addition to the instructions for operation, the user is to be instructed in all generally
applicable legal or mandatory regulations relevant to safety or the environment.
Long hair, loose-fitting garments, or jewelry can be a safety hazard. These items must be
secured prior to equipment operation.
Use protective equipment whenever appropriate or when required by law.
Carefully observe all safety instructions and warnings attached to the machine. Keep
safety labels clean and legible.
People that are being trained to operate or service the equipment must be supervised by
experienced personnel.
Any electrical work performed on the equipment must be conducted by a skilled
electrician or under the supervision of a skilled electrician. All work must observe good
electrical engineering practice and follow safety rules and local wiring standards.

(3) Safety Instructions Governing Specific Operational Phases

Avoid unsafe operation of the equipment.
The machine is only to be operated when it is in good running order. Only operate the
equipment in a safe manner; all protective and safety devices must be in place and fully
functional. This includes removable safety devices, emergency shut-off equipment,
noise-protection devices and exhaust fans.
The machine is to be checked for damage and defects at least once each work shift. Any
changes, including the working behavior of the machine, are to be reported immediately. If
necessary, the machine is to be stopped and locked-out immediately.
In case of a malfunction, the strapping machine is to be immediately stopped and
locked-out until the fault has been eliminated.
- 5 -